Problem:
- Two test cases in test_buffer.cpp used structured bindings (auto [a, b])
- Structured bindings are a C++17 feature
- Project requires C++14 compatibility
Solution:
- Replace 'auto [ptr, size] = buf.to_tuple()' with C++14 compatible code
- Use std::get<N>() to extract tuple elements
- Modified tests: ToTupleNonConst, ToTupleConst
Changes:
- Line 239: Use std::get<0/1>(tuple) instead of structured binding
- Line 252: Use std::get<0/1>(tuple) instead of structured binding
- Add explanatory comments for clarity
This ensures the test suite compiles with C++14 standard.
Problem:
- Receivers were exiting after receiving only messages_per_sender (5) messages
- In broadcast mode, each message is sent to ALL receivers
- If sender1 completes quickly, all receivers get 5 messages and exit
- This causes sender2's messages to fail (no active receivers)
Solution:
- Each receiver should loop for num_senders * messages_per_sender (2 * 5 = 10) messages
- This ensures all receivers stay active until ALL senders complete
- Now receivers wait for: 2 senders × 5 messages each = 10 total messages
- Expected received_count: 2 senders × 5 messages × 2 receivers = 20 messages
This fix ensures all senders can successfully complete their sends before
any receiver exits.
1. ChannelTest::MultipleSendersReceivers
- Add C++14-compatible latch implementation (similar to C++20 std::latch)
- Ensure receivers are ready before senders start sending messages
- This prevents race condition where senders might send before receivers are listening
2. RWLockTest::ReadWriteReadPattern
- Fix test logic: lock_shared allows multiple concurrent readers
- Previous test had race condition where both threads could read same value
- New test: each thread writes based on thread id (1 or 2), then reads
- Expected result: 1*20 + 2*20 = 60
3. ShmTest::ReleaseMemory
- Correct return value semantics: release() returns ref count before decrement, or -1 on error
- Must call get_mem() to map memory and set ref count to 1 before release
- Expected: release() returns 1 (ref count before decrement)
4. ShmTest::ReferenceCount
- Correct semantics: ref count is 0 after acquire (memory not mapped)
- get_mem() maps memory and sets ref count to 1
- Second acquire+get_mem increases ref count to 2
- Test now properly validates reference counting behavior
5. ShmTest::SubtractReference
- sub_ref() only works after get_mem() has mapped the memory
- Must call get_mem() first to initialize ref count to 1
- sub_ref() then decrements it to 0
- Test now follows correct API usage pattern
- Problem: calling h2.release() followed by shm::remove(id) causes use-after-free
- h2.release() internally calls shm::release(id) which frees the id structure
- shm::remove(id) then accesses the freed id pointer -> crash
- Solution: detach the id from handle first, then call shm::remove(id)
- h2.detach() returns the id without releasing it
- shm::remove(id) can then safely clean up both memory and disk file
- This completes the fix for all ShmTest double-free issues
- Add comprehensive documentation for shm::release(id), shm::remove(id), and shm::remove(name)
- release(id): Decrements ref count, cleans up memory and disk file when count reaches zero
- remove(id): Calls release(id) internally, then forces disk file cleanup (WARNING: do not use after release)
- remove(name): Only removes disk file, safe to use anytime
- Fix critical double-free bug in ShmTest test cases
- Problem: calling release(id) followed by remove(id) causes use-after-free crash
because release() already frees the id structure
- Solution: replace 'release(id); remove(id);' pattern with just 'remove(id)'
- Fixed tests: AcquireCreate, AcquireCreateOrOpen, GetMemory, GetMemoryNoSize,
RemoveById, SubtractReference
- Kept 'release(id); remove(name);' pattern unchanged (safe usage)
- Add explanatory comments in test code to prevent future misuse
Header changes (include/libipc/buffer.h):
- Rename: additional → mem_to_free (better semantic name)
- Add documentation comments explaining the parameter's purpose
- Clarifies that mem_to_free is passed to destructor instead of p
- Use case: when data pointer is offset into a larger allocation
Implementation changes (src/libipc/buffer.cpp):
- Update parameter name in constructor implementation
- No logic changes, just naming improvement
Test changes (test/test_buffer.cpp):
- Fix TEST_F(BufferTest, ConstructorWithMemToFree)
- Previous test caused crash: passed stack variable address to destructor
- New test correctly demonstrates the parameter's purpose:
* Allocate 100-byte block
* Use offset portion (bytes 25-75) as data
* Destructor receives original block pointer for proper cleanup
- Prevents double-free and invalid free errors
Semantic explanation:
buffer(data_ptr, size, destructor, mem_to_free)
On destruction:
destructor(mem_to_free ? mem_to_free : data_ptr, size)
This allows:
char* block = new char[100];
char* data = block + 25;
buffer buf(data, 50, my_free, block); // Frees 'block', not 'data'
- Fix handle class member functions: remove incorrect shm:: prefix
- h.acquire() not h.shm::acquire()
- h.release() not h.shm::release()
- h.sub_ref() not h.shm::sub_ref()
- Keep shm:: prefix for namespace-level global functions:
- shm::acquire(), shm::release(id), shm::get_mem()
- shm::remove(), shm::get_ref(id), shm::sub_ref(id)
- Fix comments to use correct terminology
- Resolves: 'shm::acquire is not a class member' compilation errors
- Remove 'using namespace ipc::shm;' to avoid id_t conflict with system id_t
- Add explicit shm:: namespace prefix to all shm types and functions
- Apply to: id_t, handle, acquire, get_mem, release, remove, get_ref, sub_ref
- Apply to: create and open constants
- Fix comments to avoid incorrect namespace references
- Resolves compilation error: 'reference to id_t is ambiguous'
- Collect only test_*.cpp files from test directory
- Exclude archive directory from compilation
- Use glob pattern to automatically include new tests
- Maintain same build configuration and dependencies
- Link with gtest, gtest_main, and ipc library
- Test route (single producer, multiple consumer) functionality
- Test channel (multiple producer, multiple consumer) functionality
- Test construction with name and prefix
- Test connection, disconnection, and reconnection
- Test send/receive with buffer, string, and raw data
- Test blocking send/recv and non-blocking try_send/try_recv
- Test timeout handling
- Test one-to-many broadcast (route)
- Test many-to-many communication (channel)
- Test recv_count and wait_for_recv functionality
- Test clone, release, and clear operations
- Test resource cleanup and storage management
- Test concurrent multi-sender and multi-receiver scenarios
- Test spin_lock basic operations and mutual exclusion
- Test spin_lock critical section protection
- Test spin_lock concurrent access and contention
- Test rw_lock write lock (exclusive access)
- Test rw_lock read lock (shared access)
- Test multiple concurrent readers
- Test writers have exclusive access
- Test readers and writers don't overlap
- Test various read-write patterns
- Test rapid lock/unlock operations
- Test mixed concurrent operations
- Test write lock blocks readers correctly
- Test condition variable construction (default and named)
- Test wait, notify, and broadcast operations
- Test timed wait with timeout and infinite wait
- Test integration with mutex for synchronization
- Test producer-consumer patterns with condition variables
- Test multiple waiters with broadcast
- Test spurious wakeup handling patterns
- Test named condition variable sharing between threads
- Test resource cleanup (clear, clear_storage)
- Test edge cases (after clear, immediate notify)
- Test semaphore construction (default and named with count)
- Test wait and post operations
- Test timed wait with various timeout values
- Test producer-consumer patterns
- Test multiple producers and consumers scenarios
- Test concurrent post operations
- Test initial count behavior
- Test named semaphore sharing between threads
- Test resource cleanup (clear, clear_storage)
- Test edge cases (zero timeout, after clear, high frequency)
- Test mutex construction (default and named)
- Test lock/unlock operations
- Test try_lock functionality
- Test timed lock with various timeout values
- Test critical section protection
- Test concurrent access and contention scenarios
- Test inter-thread synchronization with named mutex
- Test resource cleanup (clear, clear_storage)
- Test native handle access
- Test edge cases (reopen, zero timeout, rapid operations)
- Test exception safety of try_lock
- Test low-level API (acquire, get_mem, release, remove)
- Test reference counting functionality (get_ref, sub_ref)
- Test high-level handle class interface
- Test all handle methods (valid, size, name, get, etc.)
- Test handle lifecycle (construction, move, swap, assignment)
- Test different access modes (create, open, create|open)
- Test detach/attach functionality
- Test multi-handle access to same memory
- Test data persistence across handles
- Test edge cases (large segments, multiple simultaneous handles)
- Test all constructors (default, with destructor, from array, from char)
- Test move semantics and assignment operators
- Test all accessor methods (data, size, empty, get<T>)
- Test conversion methods (to_tuple, to_vector)
- Test comparison operators (==, !=)
- Test edge cases (empty buffers, large buffers, self-assignment)
- Verify destructor callback functionality
- Move all existing test files (*.cpp, *.h) to test/archive/
- Rename CMakeLists.txt to CMakeLists.txt.old in archive
- Prepare for comprehensive unit test refactoring
