Some code that parses or writes X.509 needs to know OID values. We provide a
convenient list. Don't remove this list from the public interface of the
library.
For user convenience, expose these values in the same header as before and
with the same name as before: `MBEDTLS_OID_xxx` in `<mbedtls/oid.h>`.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace the non-X.509-named error code `MBEDTLS_ERR_OID_NOT_FOUND` with
`MBEDTLS_ERR_X509_UNKNOWN_OID`, which already exists and is currently not
used for anything.
Public functions in X.509 propagate this error code, so it needs to have a
public name.
Remove the definition of `MBEDTLS_ERR_OID_NOT_FOUND` in `x509_oid.h`, then
```
git grep -l MBEDTLS_ERR_OID_NOT_FOUND | xargs perl -i -pe 's/\bMBEDTLS_ERR_OID_NOT_FOUND\b/MBEDTLS_ERR_X509_UNKNOWN_OID/g'
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
There was a discrepancy between how `mbedtls_test_ssl_endpoint_init()` and
`mbedtls_test_ssl_perform_handshake()` handled client authentication:
`mbedtls_test_ssl_endpoint_init()` defaulted to
`MBEDTLS_SSL_VERIFY_REQUIRED` on both sides, whereas
`mbedtls_test_ssl_perform_handshake()` obeyed `options->srv_auth_mode` which
defaulted to no verification of the client certificate.
Make this more uniform. Now `mbedtls_test_ssl_endpoint_init()` obeys
`options->srv_auth_mode` on servers (still forcing verification on clients,
which is the library default anyway). Also, `options->srv_auth_mode` is now
enabled by default. Thus:
* Tests that call `mbedtls_test_ssl_perform_handshake()` now perform client
certificate verification, unless they disable it explicitly.
* Tests that call `mbedtls_test_ssl_endpoint_init()` on a server are
unchanged. (They would change if they were setting
`options->srv_auth_mode` explicitly, which previously was ignored, but
no test function did this.)
This means that a few test functions now perform client certificate
verification whereas they previously don't. This is harmless except in
`handshake_ciphersuite_select`, where one test case
`Handshake, select ECDH-RSA-WITH-AES-256-CBC-SHA384, opaque` fails with
client authentication because the test code doesn't deal with the weirdness
of static ECDH correctly with respect to client authentication. So keep
the previous behavior in `handshake_ciphersuite_select`, by explicitly
turning off client authentication.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The DTLS context and the queues now conveyed inside the endpoint object.
Remove the unused parameters.
No behavior change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Both PKCS7 and X509 rely on PK module under the hood and the latter can
use PSA to store keys and perform operations. Therefore psa_crypto_init()
must be called before any operation can be done with PKCS7 and X509.
Signed-off-by: Valerio Setti <valerio.setti@nordicsemi.no>
The commented out tests cause crashes (in different ways) until the bug
is fixed; the first two test are passing already and are here mostly to
provide a reference point.
The bug report was using programs/x509/cert_write, but string_to_names()
is what it was really targetting, which is better for automated tests.
The strings used are a minor adapation of those from the report.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
* public/development: (23 commits)
tests: suite_x509parse: set PSA max operations in x509_verify_restart()
library: debug: remove mbedtls_debug_printf_ecdh()
library: debug: make mbedtls_debug_print_psa_ec() static
Remove call to pk_decrypt() in ssl_server2
Change hardcoded error values in ssl-opt to take in the PSA error alias
Test with GCC 15 with sloppy union initialization
Update crypto with the union initialization fixes
Mark ssl_tls12_preset_suiteb_sig_algs const
Mark ssl_tls12_preset_default_sig_algs const
Use PSA macros for the `pkalgs` domain
reverted compat-2.x.h removal from psa-transition.md
Correct ChangeLog file extension
Add ChangeLog
remove compat-2.x.h
Remove trace of secp224k1
Update submodules
Improve comments
Allow gcc-15 to be in $PATH
Enable drivers when testing with GCC 15
GCC 15: Silence -Wunterminated-string-initialization
...
Set also psa_interruptible_set_max_ops() when mbedtls_ecp_set_max_ops()
is set so that the same amount of operations will be used both if legacy
ECDSA_C or PSA is used under the hood to perform the operation.
Signed-off-by: Valerio Setti <valerio.setti@nordicsemi.no>
The OID module is used by both crypto and X.509. It has moved to the
`tf-psa-crypto` subdirectory, and the sibling commit
08d8cc57dbe7be54fe3f88ecbc2729300c48d450 removes this subdirectory from the
`mbedtls` repository in order to make `tf-psa-crypto` a submodule. We want
to access the relevant parts directly from X.509 rather than go through the
crypto repository, because OID functions are only accessible as private
interfaces, and crypto doesn't know when a particular OID function is needed
in the build since it depends on X.509 configuration options.
Make a copy of the OID module and its unit tests. In a follow-up, the X.509
module will switch to consuming this copy rather than the one that went into
TF-PSA-Crypto.
Rename the files from `*oid*` to `*x509_oid*` to follow the naming
convention that submodules of X.509 are prefixed with `x509`. This also
avoids file name clashes with TF-PSA-Crypto.
Since OID is not a public interface of Mbed TLS 4.x, move the header file
into `library`.
This commit only makes the files available. Subsequent commits will take
care of making these files used in the build.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Parsing of CRT files with message's hash alg different from the MGF1 was
allowed in the past, but now it fails. So we need to move/adapt tests
relying on this feature, from a "verify" scope to a "parse" one.
Signed-off-by: Valerio Setti <valerio.setti@nordicsemi.no>
We were not making enough room. We want to move everything from the
place where we are going to insert the new record.
This was not causing failures because the code does not look at the
content after the inserted record, because it correctly returns an error
when seeing the inserted record. But as a matter on principle, the test
code should be doing what it says: just insert a new record but leave
a valid fragment after it.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This one is overly tight: TLS 1.3 actually only depends on
ChachaPoly || (AES && (GCM || CCM))
Furthermore, this should really be reflected in check_config.h.
Individual test cases should be able to just request PROTO_TLS1_3 and
know that there is ciphersuite that works.
However, resolving that seems out of scope for this PR. (It would also
involve updating depends.py for example.)
So, use a dependency that's stricted than necessary. IMO it's still good
enough as most configs we test will have ChachaPoly. However it would be
good to revisit this when a cleaner solution is implemented.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The function depends on MBEDTLS_SSL_HANDSHAKE_WITH_CERT_ENABLED which is
basically
MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED ||
MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED
The individual test cases depend on the specific TLS version.
This is not precise enough. In a build with both TLS versions enabled,
we could have cert-based key exchange in one version but not in the
other. So, we need the 1.3 tests to depend on the 1.3 cert-based key
exchange and similarly for 1.2.
For 1.2, cert-based key exchange means ECDHE-{RSA,ECDSA} or
ECDH-{RSA,ECDSA}. Since the test function sets an ECC cert for the
server, we want one of the ECDSA ones. So, the minimal dependency would
be ECDH_ECDSA || ECDHE_ECDSA. Since dependencies with || are
inconvenient to express, and anyway ECDH_ECDSA (static ECDH) is
something we'd like to remove in 4.0 if we can find the time, I chose to
just depend on ECDHE_ECDSA.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
These are not optimal. For example, the tests should in principle be
able to run in builds without ECDSA, by using RSA certs instead. Ideally
PSK should work too.
However, getting optimal dependencies would be a lot of work that's
largely orthogonal to the purpose of this PR, so we'll settle for good
enough.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Simulate the server closing the connection after a partial handshake
message.
These test cases don't send a close_notify alert. The test cases
"insert alert record" exercise what happens if the server sends an alert.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Create tests that coalesce the handshake messages in the first flight from
the server. This lets us test the behavior of the library when a handshake
record contains multiple handshake messages.
Only non-protected (non-encrypted, non-authenticated) handshake messages are
supported.
The test code works for all protocol versions, but it is only effective in
TLS 1.2. In TLS 1.3, there is only a single non-encrypted handshake record,
so we can't test records containing more than one handshake message without
a lot more work.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
HKDF-Expand can produce at most 255 * hash_size bytes of key material,
so this limit applies to the TLS 1.3 key material exporter.
Signed-off-by: Max Fillinger <maximilian.fillinger@foxcrypto.com>
This is more flexible: the test data gets to decide whether we want to
assert the presence of a pattern or not.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This should avoid running into a bug with printf format specifiers one
windows.
It's also a logical move for actual tests: I used the highest debug
level for discovery, but we don't need that all the time.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Declare the same dependencies as for the previous TLS 1.3 tests, except
for part that varies with the cipher suite (ie AES-GCM).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We're not sending a signature_algorithm extension, which means SHA-1.
Caught by depends.py hashes
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
In addition to secp256r1 for the handshake, we need secp384r1 as it's
used by the CA certificate.
Caught by depends.py curves
Also, for the "unknown ciphersuite" 1.2 test, use the same key type and
all the same dependencies as of the "good" test above, to avoid having
to determine a second set of correct dependencies just for this one.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This guards the definition of mbedtls_test_ssl_endpoint which we rely
on, so the function won't compile without it.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Two of these tests reveal bugs in the code, so they're commented out for
now.
For the other tests, the high-level behaviour is OK (break the
handshake) but the details of why are IMO not good: they should be
rejected because interleaving non-HS record between HS fragments is not
valid according to the spec.
To be fixed in future commits.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The Windows CRT treats any invalid format specifiers passed to the CRT
as fatal assertion failures. Disable thie behaviour temporarily while
testing if the format specifiers we use are supported.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Move the suite's global dependency on MBEDTLS_SSL_TLS_C to the
individual test cases.
Add an preprocesor guard around string_debug to prevent warning about unused
functions.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Pre-existing but not having TLS 1.3 in the build does not seem to be
necessary actually. These test functions set the dtls flag when
calling `test_resize_buffers` and then `test_resize_buffers` sets the
`options.dtls` flag which eventually forces the TLS 1.2 version of the
protocol (in `mbedtls_test_ssl_endpoint_init()` call of
`mbedtls_ssl_config_defaults()` with `MBEDTLS_SSL_TRANSPORT_DATAGRAM`
as the transport).
Signed-off-by: Gabor Mezei <gabor.mezei@arm.com>
