Make sure that we don't enable memory poisoning when
MBEDTLS_PSA_COPY_CALLER_BUFFERS is disabled.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
This commit
- Reverts changes previously done to psa_crypto_helpers.[c,h]
- Implements a new check for open key slots in
mbedtls_test_helper_is_psa_leaking():
- when CTR_DRBG does not use AES_C or PSA does not have an external
RNG, then we allow 1 key slot (it's the one holding the AES key)
- when the above conditions are not met, then we fallback to the
usual check for "no open key slots remaining"
Signed-off-by: Valerio Setti <valerio.setti@nordicsemi.no>
When AES_C is not defined CTR_DRBG relies on PSA to get AES-ECB. This
means that, when AES-ECB is accelerated, each random operation goes through
driver access as well. This might result in unexpectedly increased
counters for driver's access.
We add extra counters in test_driver_[cipher/key_management].c to be
more specific on which driver functions are accessed and ignore
extra accesses due to CTR_DRBG.
Signed-off-by: Valerio Setti <valerio.setti@nordicsemi.no>
After adding a check in ssl_conf_check(), we have configured RNG via
mbedtls_ssl_conf_rng() for TLS tests in both test_suite_ssl.function
and test_suite_debug.function. As a result, rng_get() is not only
available when MBEDTLS_SSL_HANDSHAKE_WITH_CERT_ENABLED enabled.
Therefore, we remove the guard for rng_get() to make it accessible for
TLS tests which have call for mbedtls_ssl_setup().
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
Asan poisons memory with an 8-byte granularity. We want to make sure that
the whole specified region is poisoned (our typical use case is a
heap-allocated object, and we want to poison the whole object, and we don't
care about the bytes after the end of the object and up to the beginning of
the next object). So align the start and end of the region to (un)poison to
an 8-byte boundary.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
While an area of memory is poisoned, reading or writing from it triggers a
sanitizer violation.
Implemented for ASan.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
A new internal function is added to get cipher's info (mode, key bits and
iv len) without relying on CIPHER_C. This function is basically a lookup
table used only for test purposes.
Signed-off-by: Valerio Setti <valerio.setti@nordicsemi.no>
Conflicts:
* `include/mbedtls/build_info.h`: a new fragment to auto-enable
`MBEDTLS_CIPHER_PADDING_PKCS7` was added in
c9f4040f7f3356293e90c58d11f6567def641e08 in `development-restricted`.
In `development`, this section of the file has moved to
`include/mbedtls/config_adjust_legacy_crypto.h`.
* `library/bignum.c`: function name change in `development-restricted` vs
comment change in development. The comment change in `development` is not
really relevant, so just take the line from `development-restricted`.
New bignum modules are only needed when the new ecp_curves module is
present. Remove them when they are not needed to save code size.
Signed-off-by: Janos Follath <janos.follath@arm.com>
When building tests, the path of the library
directory is part of the possible paths for
the includes thus no need to construct it
manually when including headers.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This patch removes the `int_rep` input parameter for modular
setup, aiming to align it with the optred variant.
Test and test-suite helper functions have been updated
accordingly.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
As usual, just a search-and-replace plus:
1. Removing things from hash_info.[ch]
2. Adding new auto-enable MD_LIGHT in build-info.h
3. Including md_psa.h where needed
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Mostly a search and replace with just two manual changes:
1. Now PK and TLS need MD light, so auto-enable it.
2. Remove the old function in hash_info.[ch]
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The seed file must exist before running tests. Because the location is
somewhat platform- and configuration-dependent, and to be friendly to
developers who run test suites individually and aren't familiar with this
feature, rely on the test framework code rather than on test scripts to
create the seed file.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The build option MBEDTLS_PSA_INJECT_ENTROPY requires some extra platform
functions, for historical reasons. To enable us to test this option, provide
a version of these functions for testing.
(These versions would actually work in production, but providing them in the
library in a way that doesn't break existing users might be slightly tricky,
so it's out of scope of this commit.)
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Changes in test_suite_psa_crypto are to enforce the dependency
on ECP_C which is mandatory for some key's derivation.
Signed-off-by: Valerio Setti <valerio.setti@nordicsemi.no>
Set hybrid TLS 1.2/1.3 as default server
configuration if both TLS 1.2 and TLS 1.3
are enabled at build time.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Move min/max TLS version setting to endpoint init
where it fits better: before the call to
mbedtls_ssl_setup() and available for all tests
not only those calling perform_handshake().
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The support for the PSA crypto driver interface
is not optional anymore as the implementation of
the PSA cryptography interface has been restructured
around the PSA crypto driver interface (see
psa-crypto-implementation-structure.md). There is
thus no purpose for the configuration options
MBEDTLS_PSA_CRYPTO_DRIVERS anymore.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
1. Change USE_PSA_CRYPTO_INIT/DONE to MD_OR_USE.
2. Add missing occurrences - some of these were already necessary in
principle (in one form or another) but where missing and this was not
detected so far as `psa_hash` doesn't complain in case of a missing
init, but now MD makes it visible.
3. Add missing include in ssl_test_lib.h.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
ssl_helpers.c is treated with W3 warning level in MSVC complier.
So that it's reported as error for warning of conversion from
size_t to int. This change fixes all this type of warning seen in
Microsoft Visual Studio 12.0. Besides, some potential problems of
type conversion are also handled.
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
During test of component build_arm_linux_gnueabi_gcc_arm5vte and
build_arm_none_eabi_gcc_m0plus. It fails with
- error: implicit declaration of function
‘test_fail_if_psa_leaking’
It happens because test_fail_if_psa_leaking is defined in
helpers.function. This block of code is not converted into C code
while compiling ssl_helpers.c. The function has been moved to
psa_crypto_helpers.c in order to fix this build error.
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
tests/src/ssl_helpers.c depends on functions defined
in library/*.c. If it's complied as an OBJECT with other c files,
cmake complains undefined reference in link stage under programs/.
Therefore, tests/src/test_helpers/ is created to hold c files with
dependency of library/*.c. Besides, tests/src/test_helper/*.c is
separated into another OBJECT, mbedtls_test_helpers, as sources
to build all test suite executables.
In addition, everest header directory is included in case
MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED is enabled.
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
Since we move many functions from test_suite_ssl.function to
ssl_helpers.c in commit 8e2bbdd. This causes various of
build errors. This commit fixes all the build errors by
- including header files
- providing function definition
- adding guards for typedef statements and functions
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
Some functions are renamed in commit d51d285. This change moves all
those functions which are used to set up a TLS connection from
test_suite_ssl.function into ssl_helpers.c.
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
test_suite_ssl.function contains many functions that are used to set
up a TLS connection. To reduce its file size, those functions would
be moved to ssl_helpers.c under tests/src. As the start of this
implementation, some necessary header files are moved in advance.
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
This is done to solve the problem with memory leak when pake abort status is forced. In this case the driver/build-in abort function was not executed.
After failure core clears the operation object and no successive abort call is possible.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
- Add `alg` and `computation_stage` to `psa_pake_operation_s`.
Now when logic is moved to core information about `alg` is required.
`computation_stage` is a structure that provides a union of computation stages for pake algorithms.
- Move the jpake operation logic from driver to core. This requires changing driver entry points for `psa_pake_output`/`psa_pake_input` functions and adding a `computation_stage` parameter. I'm not sure if this solution is correct. Now the driver can check the current computation stage and perform some action. For jpake drivers `step` parameter is now not used, but I think it needs to stay as it might be needed for other pake algorithms.
- Removed test that seems to be redundant as we can't be sure that operation is aborted after failure.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
When including <test/bignum_helpers.h>, the library/ directory now needs to
be on the include path.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move bignum-related helper functions to their own files under tests/include
and tests/src. The primary motivation is that a subsequent commit will make
bignum_helpers.h include library/bignum*.h, but we want to be able to
include <test/helpers.h> without having the library directory on the include
path (we do this in some programs under programs/ intended for testing).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The bignum module does not officially support "negative zero" (an
mbedtls_mpi object with s=-1 and all limbs zero). However, we have a
history of bugs where a function that should produce an official
zero (with s=1), produces a negative zero in some circumstances. So it's
good to check that the bignum functions are robust when passed a negative
zero as input. And for that, we need a way to construct a negative zero
from test case arguments.
There are checks that functions don't produce negative zeros as output in
the test suite. Skip those checks if there's a negative zero input: we
don't want functions to _create_ negative zeros, but we don't mind if
they _propagate_ negative zeros.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This way static analyzers have a chance of knowing we don't expect the
bignum functions to support empty inputs. As things are, Coverity keeps
complaining about it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add component_test_psa_config_accel_ecdh to all.sh to test key agreement driver wrapper with libtestdriver1.
Signed-off-by: Aditya Deshpande <aditya.deshpande@arm.com>
Test functions must now take a char* argument rather than data_t*. This does
not affect existing test data.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When testing a function that is supposed to be constant-flow, we declare the
inputs as constant-flow secrets with TEST_CF_SECRET. The result of such a
function is itself a constant-flow secret, so it can't be tested with
comparison operators.
In TEST_EQUAL, TEST_LE_U and TEST_LE_S, declare the values to be compared as
public. This way, test code doesn't need to explicitly declare results as
public if they're only used by one of these macros.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
As a public header, it should no longer include common.h, just use
build_info.h which is what we actually need anyway.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The same elements are now also used when MBEDTLS_USE_PSA_CRYPTO
is defined and respective SHA / MD5 defines are missing.
A new set of macros added in #6065 is used to reflect these dependencies.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Test assertions for integer comparisons that display the compared values on
failure. Similar to TEST_EQUAL.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't try to use {sign,verify}_message on algorithms that only support
{sign_verify}_hash. Normally exercise_key() tries all usage that is
supported by policy, however PSA_KEY_USAGE_{SIGN,VERIFY}_MESSAGE is implied
by PSA_KEY_USAGE_{SIGN,VERIFY}_HASH so it's impossible for the test data to
omit the _MESSAGE policies with hash-only algorithms.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't re-code the logic to determine a valid nonce length.
This fixes exercise_key() for PSA_ALG_CHACHA20_POLY1305, which was trying to
use a 16-byte nonce.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Support ECB, which has no IV. The code also now supports arbitrary IV
lengths based on the algorithm and key type.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
As PSA signatures rely on built-in hash implementations
(cannot take an advantage of an accelerator for the
time being), chose an available built-in hash for
tests exercising a signature key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The current testing of the PSA configuration is
based on test code located in the library itself.
Remove this code as we are moving to using a
test library instead.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This commit removes the test_psa_crypto_config_basic
all.sh component that can no longer work without
adapting it to the separately compiled test driver
library. This component is replaced by several
components in the following commits to test various
type of acceleration independently.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename test driver entry points to
libtestdriver1_<name of the Mbed TLS entry point>.
This aligns with the renaming of all Mbed TLS APIs
for the test driver library (that will be put in place
in the following commits) to avoid name conflicts
when linking it with the Mbed TLS library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of the driver test entry points to be
provided by a test driver library, move their prototypes
to tests directory.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define test driver entry points that provide an alternative
to Mbed TLS driver entry points only when the PSA configuration
is used. Their purpose is only to test the PSA configuration
thus there is no good reason to use them out of this scope.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Align RSA/ECP sign/verify hash dispatch with the
corresponding code of the library. The library
code was modified recently but not the test code
one and these modifications ease the following work.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The current definition of PSA_ALG_IS_HASH_AND_SIGN includes
PSA_ALG_RSA_PKCS1V15_SIGN_RAW and PSA_ALG_ECDSA_ANY, which don't strictly
follow the hash-and-sign paradigm: the algorithm does not encode a hash
algorithm that is applied prior to the signature step. The definition in
fact encompasses what can be used with psa_sign_hash/psa_verify_hash, so
it's the correct definition for PSA_ALG_IS_SIGN_HASH. Therefore this commit
moves definition of PSA_ALG_IS_HASH_AND_SIGN to PSA_ALG_IS_SIGN_HASH, and
replace the definition of PSA_ALG_IS_HASH_AND_SIGN by a correct one (based
on PSA_ALG_IS_SIGN_HASH, excluding the algorithms where the pre-signature
step isn't to apply the hash encoded in the algorithm).
In the definition of PSA_ALG_SIGN_GET_HASH, keep the condition for a nonzero
output to be PSA_ALG_IS_HASH_AND_SIGN.
Everywhere else in the code base (definition of PSA_ALG_IS_SIGN_MESSAGE, and
every use of PSA_ALG_IS_HASH_AND_SIGN outside of crypto_values.h), we meant
PSA_ALG_IS_SIGN_HASH where we wrote PSA_ALG_IS_HASH_AND_SIGN, so do a
global replacement.
```
git grep -l IS_HASH_AND_SIGN ':!include/psa/crypto_values.h' | xargs perl -i -pe 's/ALG_IS_HASH_AND_SIGN/ALG_IS_SIGN_HASH/g'
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When TEST_EQUAL fails, show the two numerical values in the test log (only
with host_test). The values are printed in hexa and signed decimal.
The arguments of TEST_EQUAL must now be integers, not pointers or floats.
The current implementation requires them to fit in unsigned long long
Signed values no larger than long long will work too. The implementation
uses unsigned long long rather than uintmax_t to reduce portability
concerns. The snprintf function must support "%llx" and "%lld".
For this purpose, add room for two lines of text to the mbedtls_test_info
structure. This adds 154 bytes of global data.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Also fiixed the following merge problems:
crypto_struct.h : Added MBEDTLS_PRIVATE to psa_aead_operation_s
members (merge conflict)
psa_crypto_aead.c : Added ciphertext_length to mbedtls_gcm_finish
call (change of API during development)
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
A minimal test driver extension is added to support
copy of opaque keys within the same location.
Test vector support is extended to cover opaque keys.
Signed-off-by: Archana <archana.madhavan@silabs.com>
The validation against key width and max key bits is extended to
all key types from the existing validation for only symmetric keys.
Signed-off-by: Archana <archana.madhavan@silabs.com>
-Add test driver support to import/export while wrapping keys
meant to be stored in the PSA core as opaque( emulating an
SE without storage ).
-Export validate_unstructured_key_bit_size as
psa_validate_unstructured_key_bit_size, thereby changing its scope.
-Improve the import/export test cases in test_suite_psa_crypto to also
cover opaque keys, thereby avoiding duplication.
Signed-off-by: Archana <archana.madhavan@silabs.com>
This test helper reads an MPI from a string and guarantees control over the
number of limbs of the MPI, allowing test cases to construct values with or
without leading zeros, including 0 with 0 limbs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
